Low Cost Lifting Column

Linear Actuators│Columns are easy to apply, quick to install and require no maintenance. Our wide variety of
options, Control-Boxes and handsets makes it easy to find the perfect solution for your application

GENERAL FEATURES OF PRODUCTS IN THIS CATALOGUE (if not mentioned otherwise):

• Top-End-Clevises: Linear Actuators are equipped with Top-Clevis diameter 10.1 mm and no slot, End-Clevis diameter 10.1 mm and 10 mm slot
• Horizontal or Vertical: Position of the End-Clevis of most of the Linear Actuators/Columns can bee chosen
• Protection Class: Lifting Columns and Control Boxes are IP54, Linear Actuators are IP 43
• Operating Temperature Range: Linear Actuators/Columns range is -26°C to 65°C, Control-Boxes range is 0°C to 40°C
• Full Load Duty Cycle: Linear Actuators/Columns and Control-Boxes are 10%, max 2 min (at 25°C)
• Inner Limit Switches: Are installed in Linear Actuators/Columns
• Push and Pull: Actuators/Columns have a load capacity for both directions push and pull
• Aluminium Alloy: Is used by most of the Linear Actuators/Columns
• Hall Sensors: Can be installed in Lifting Columns for synchronisation function or position memory
• Synchronisation: Is used only by appropriate Actuators/Columns (equipped with Hall sensors), Control-Boxes and Hand-Foot-Controls (as you will find in this catalogue)
• Synchronised Stroke: Is reduced by 15 mm compared to the ordering stroke (see picture)
• Maximum Current: : Of the Linear Actuators/Columns is 5 A at 24 VDC or 10 A at 12 VDC
• Cables: 1.5m straight are standardly used for Linear Actuators/Columns, for Control-Boxes 3m straight and for Hand-Foot-Control 1m coiled (stretched 4m), colours are Black or Grey according to the Actuator
• Actuator Plugs: To select the appropriate one, please see first the Control-Box you would like to use.